|
|
DESCRIPTION
A Check Valve allows fluid flow only in one direction, and does not allow the reverse flow.
It can be used on the export of hydraulic pumps, in order to prevent fluid backflow; separated the link between the Circuit, in order to interfere with each other; parallel to the sequence valve, pressure reducing valve, throttle and Speed Control Valve parallel to form a Check Sequence Valve, check pressure reducing valve, check throttle speed control valve and so on.
OPERATION
The valve allows flow from 1 to 2 with very low pressure drop,
while blocks flow from 2 to 1. DF08-01 blocks flow from 1 to 2 until sufficient pressure is applied at 1.
SPECIFICATION
Max working pressure:315bar
Max flow: 30L/min
Working Flow:See performance
Internal leakage:≤0.3ml/min at 210 bar
Filtration of oil: 25 μm or better
Cavity:T4-1
Seal:-30-110℃ Standard Buna seals
Installation torque: 24.5-27.2Nm
FEATURES .
• Unitized, molded coil design.
• Industry common cavity.
• Compact size.
More
For more information please feel free to contact us:
Email: deson@dtuneracing.com Mr.Deson
1)3-Port Non-vented ,Cartridge Counterbalance valves
2)3-Port Atmospherically Referenced, Vented Counterbalance Valves
We can also develop the hydraulic screw-in cartridge counterbalance valves and manifold blocks according to your drawings or samples.
Looking forward to having cooperation with you in the near future!
|
